Getting Started
12
2.4
Registration (Pairing)
The Baby Monitor is pre-registered to your Parent Unit. You do not
need to register it again unless the Baby Unit loses its link with the Parent
Unit.
To re-register your Baby Unit, or register a new Baby Unit, follow the
procedures below:
1.
Press the menu button and the menu bar will pop up.
2. Press the < LEFT button or > RIGHT button until is highlighted, and the
del/ add/ view/ scan menu will pop up.
3. Press the + UP button or - DOWN button to select add, and press the
OK button to confirm.
4. Camera
/
/
/
will pop up. Press the + UP button or
- DOWN button to select the desired Camera, and press the
OK
button to start searching for a camera unit.
Note: If a camera is currently paired with the Parent Unit, its camera
location (with a * against it) cannot be selected for a new registration.
5. Press and hold the PAIR button on the back of the Baby Unit until the
Parent Unit finds the camera, beeps and PAIR OK appears on the
screen. The video from the camera will then appear.
NOTE
A camera can only be registered to one Parent Unit at any one time.