Motorola Symbol PL4507, Руководство по интеграции

Страница: 295 / 424

Advanced Data Formatting 11 - 31
Move Cursor
Scan a bar code below to move the cursor in relation to a specified character. Then enter a character by scanning
a bar code from the
Alphanumeric Keyboard on page 11-91 .
Move Cursor to Last Occurrence
of String and Replace All This action replaces all occurrences of a selected string with another
user-defined string, and moves the cursor to the beginning of the last
occurrence. Scan
Move Cursor to Last Occurrence of String and
Replace All , then enter an alphanumeric string representing the
character(s) (up to 10) to match and delete using the Alphanumeric
Keyboard . Scan the End of Message . Enter another alphanumeric
string representing the character(s) (up to 10) to insert using the
Alphanumeric Keyboard . Scan End of Message .
11-32
Skip to End Scan Skip to End to move the cursor to the end of the data. 11-32
Skip Ahead “N” Characters Scan one of these bar codes to select the number of positions ahead
to move the cursor. 11-33
Skip Back “N” Characters Scan one of these bar codes to select the number of positions back to
move the cursor. 11-34
Send Preset Value Send Values 1 through 6 by scanning the appropriate bar code. These
values must be set using the prefix/suffix values in
Table 7-4 on page
7-19 .
Value 1 = Scan Suffix
Value 2 = Scan Prefix
Values 3-6 are not applicable
11-34
Table 11-2
Setup Field(s) Definitions (Continued)
Parameter Description Page
NOTE If there is no match when the rule is interpreted and the rule fails, the next rule is checked.
Move Cursor To Character
Move Cursor To Start