Motorola SURFboard SBG901, Руководство пользователя

Страница: 98 / 130

10 Troubleshooting 98
This document is uncontrolled pending incorporation in PDM
Problem Possible Solution
After resolving your problem, be sure to re-enable wireless security.
On the Wireless Basic Page:
• Check whether you turned on Disable SSID Broadcast. If it is on, be sure
the network name (SSID) on each affected wireless client is identical to the
SSID on the SBG901.
• On the Wireless Access Control Page, be sure the MAC address for each
affected wireless client is correctly listed.
Slow wireless
transmission speed with
WPA enabled
On the Wireless Security Page, check whether the WPA Encryption type is
TKIP. If all of your wireless clients support AES, change the WPA
Encryption to AES.
Front-Panel LEDs and Error Conditions
The SBG901 front panel LEDs provide status information for the following error conditions:
Table 32 Front-Panel LEDs and Error Conditions
LED Status If, During Startup: If, During Normal Operation:
POWER OFF The SBG901 is not properly plugged
into the power outlet The SBG901 is unplugged
RECEIVE FLASHING The downstream receive channel
cannot be acquired The downstream channel is lost
SEND FLASHING The upstream send channel cannot be
acquired The upstream channel is lost
ONLINE FLASHING IP registration is unsuccessful The IP registration is lost