X
Home
Exit
Introduction
Before You Begin
Installation
Configuration
Troubleshooting
Legal
26
Configuring for TCP/IP in Windows 2000
The following basic instructions are for Windows 2000 users. Windows 95, 98, and Me
instructions begin on page 23. If you are using a different operating system, refer to your
user guide.
1
On the Windows Desktop, click
Start
.
2
Select
Settings
and then
Control Panel
from the pop-up menus.
3
Double-click the
Network
and
Dial-up Connections
icon on the Control Panel
window.
4
On the Network and Dial-up Connections window, click
Local Area Connection #
. The value of this number (#) varies from system to
system, but usually is 2. The Local Area Connection # Status window is displayed
as shown at the top of the next page.
