Removing Operating System (O/S) Files
1
Be sure the SB4100 modem is
disconnected from your computer.
2
Insert the SB4100 CD into the CD drive.
3
On the Windows Desktop, click Start.
4
Select Run.
5
Type in your CD drive and then
\remove.exe.
Example: D:\remove.exe.
6
Click OK and the remove program
automatically runs. An operations
message and the O/S name display above
the Operations box.
7
If the O/S is not supported, the remove
utility is disabled. Go to step 10.
8
If an O/S is supported, click
Remove Driver.
Each step displays in green indicating the
file is being removed. If a file cannot be
located, the remove process fails and
displays the step in red.
A file could be missing if the original USB
installation process was interrupted and
the files were not fully installed.
9
Click About to view files and registries that
can be removed manually in Microsoft
Explore. This screen also provides more
information on the function of the USB
Driver Removal application.
10
Click Exit.
Introduction Before You Begin Installation Operation
Basic Configuration
Troubleshooting
18
SSUURRFFbbooaarrdd
R
TM
