manualshive.com logo in svg

Motorola STB4278, Руководство пользователя, Страница: 26 / 418

Поделиться
Скачать
Motorola STB4278 Скачать руководство пользователя страница 26

Symbol LS4278 Product Reference Guide

1-8

Scanner Cradle

The scanner cradle serves as a stand, charger, and host interface for the scanner. The cradle sits on a desktop or mounts on a vertical 
surface (such as a wall). For more information about mounting options and procedures, refer to the documentation included with the 
cradle.

There are two versions of the cradle:

•

Charging cradle with radio

: When the cordless scanner is paired to the cradle, all communication between the scanner 

and the host computer is accomplished through the cradle. Each bar code contains programming instructions or other data 
unique to the bar code pattern. The scanner is paired to the cradle and transmits bar code data to the cradle via Bluetooth 
Technology Profile Support. The cradle then sends that information via an interface cable to the host computer for 
interpretation.

•

Charge-only cradle

: This cradle serves as a stand and battery charger. It does not contain a radio and has no 

communication capability. 

For more information about communication between the scanner, cradle and host, see 

Chapter 4, Radio 

Communications

.

Connecting the Cradle 

Important: 

Connect the interface cable and power supply (if necessary) in the following order to ensure proper operation of the 

scanner and cradle:

1.

If a power supply is connected to the cradle, disconnect it. See 

Figure 1-5

.

2.

If using an interface cable, insert the cable into the cradle’s host port.

3.

If using a power supply that connects to the interface cable, insert this power supply into the power connector on the 
interface cable, and the other end to an AC supply.

4.

Insert the other end of the interface cable into the appropriate port on the host computer (see the specific host chapter for 
information on host connections).

5.

If using an external power supply (if required by the interface, or to allow fast charging of the scanner), insert the power 
cable into the power port on the back of the cradle, and connect the power supply to an approved AC supply (see the 

STB4208/4278 Cradle Quick Reference Guide

 for more information).

Figure 1-5.  Connecting the Cables to the Cradle

Power Port

Host Port

Содержание STB4278



































































































































































































































































































































































































































Отзывы:

Нет отзывов