Motorola ST8000, Быстрая справка

Страница: 23 / 84

Making and Receiving Phone Calls
21
Phone Book Dialing
j
One-Touch
To quickly place a call to a number stored in one of the first nine
locations of your Phone Book
* , press and hold the digit key
corresponding to the number’s memory location. For example,
pressing and holding
2
will dial the number stored in location
2 of your Phone Book.
A
You do not need to press
O
to call the number.
By Location
1 Press
Q
and a location number. For example
Q23
will retrieve the number stored in location 23 of the Phone Book.
If you don’t know the exact location, enter a random location
and then use
<
and
>
to scroll to the number. Location
numbers can range from 1 to 255.
2 Press
O
to call the number.
A
Enter the full 3-digit location number for maximum search
speed (for example, 001 for location 1).
By Name
You can also recall numbers in the Phone Book by name.
1 Press the Smart Button.
2 Scroll through the alphabetically-listed names using either the
volume buttons or
<
and
>
.Or, press a digit key (2-9)
to go directly to the first corresponding alpha entry (i.e. press
5
to go to entries beginning with J). To return to the first
entry, press the Smart Button again.
3 Press
O
to call the number of the selected name.
*See ‘One-Touch Dial Setting’ on page 39 to determine which Phone Book
list is set up for One-Touch Dialing.
Last Number Called
To retrieve the last number dialed, you can also use
Last Ten
Calls
in the Phone Book menu.
Calling an Embedded Number in a Message
See
Messages Menu
on page 46 for details on how to call a
phone number embedded in a message.
International Phone Calls
To make an international phone call, press and hold
0
. After
a few seconds, the international dialing prefix
+
will appear in the
display. This allows you to call from any country without knowing
the local international access code.
Now enter the country code, followed by the phone number. The
country code follows the conventional format, 49 for Germany,
44 for the UK, 46 for Sweden, etc.
Inserting Pauses Into Phone Numbers
When you call automated systems, a recorded message prompts you
for PIN numbers, account numbers, etc. You can store these numbers
in the same memory location as the automated system’s access
number. Just separate the numbers with “pauses”– special characters
that tell your phone to wait before sending additional numbers – and
store or dial the string in the same way you would other numbers.
To insert a pause, just press and hold
*
for a couple of
seconds. You will see the pause symbol
Ü
.
Pauses tell your phone to wait for three seconds before sending
the next string of numbers. Your phone will not begin the three
second delay for the first pause until the call is answered.
i
When in standby mode, press
O O.