Motorola ST7000 Скачать руководство пользователя страница 40

Страница: 40 / 91

3.3.2

Making Group Calls in DMO

The Group Call is received by all members of the selected group who have their units turned on and
are in range.

Procedure:

Press and hold the

PTT

button.

Wait for the

Talk Permit

tone (if configured) and then speak into the microphone. Release the

PTT

button to listen.

3.3.3

Receiving Group Calls in Idle

Procedure:

Your radio receives a Group Call.

NOTICE:

The incoming Group Call is signaled by a

Receiving Group Call

tone.

To respond, press and hold the

PTT

button.

3.3.4

Selecting DMO Communications Options

When and where to use:

Helps to communicate with other radio users on the same talkgroup through

the Gateway or Repeater.

Procedure:

From the home screen, press the

Menu/OK

key.

Select

Networks

→

DMO Config

Select one of the following options:

•

MS - MS

– Your radio can communicate only with other radios within its range.

•

Gateway

– Your radio uses a gateway to communicate with the infrastructure.

•

Automatic

– Your radio uses the first available gateway for that talkgroup.

•

Specific

– Your radio uses only the Gateway with the specified Gateway address for that

talkgroup.

•

Repeater

– Uses the first available repeater for that talkgroup.

•

GW + Rep

– Uses the first available gateway or repeater for that talkgroup.

•

Automatic

– Uses the first available gateway for that talkgroup.

•

Specific

– Uses only the Gateway with the specified Gateway address for that talkgroup.

NOTICE:

When the Gateway and the Repeater cannot be communicated even though a
talkgroup to use them is configured, the radio attempts the direct MS-MS
communication.

Your service provider can disable any or all of these options.

When your radio detects the appropriate Gateway and/or the Repeater, the Gateway and/or Repeater
icons turns solid, respectively.

MN002958A01-AF
Chapter 3: Modes

Содержание ST7000



























































































Результаты поиска

Содержание ST7000

Отзывы:

Похожие инструкции для ST7000

Бренды по названию

Популярные бренды

Motorola ST7000, Руководство пользователя по функциям

Результаты поиска

Содержание ST7000

Отзывы:

Похожие инструкции для ST7000

Бренды по названию

Популярные бренды