Motorola SGSW-2620, Руководство пользователя, Страница: 4 / 68

5 installing the handsfree car kit
• The installation steps are in no particular order.
In general, you should first pick the locations
where you will be mounting the UIM,
microphone, speaker, and ECU. Mount the
UIM, speaker and microphone and route the
cables to the ECU mounting location. Install
the power adaptor cable. Plug everything into
the ECU, and then mount the ECU.
installing the handsfree
car kit
Caution: This car kit must be connected to a
maximum 5 Amp fuse in the car fuse panel to
prevent fire or other damages should a short circuit
occur in the ECU.
Before installation, unpack, assemble, and test all
components on a service bench.
installing the Electronic Control
Module (ECU)
Mount the ECU securely.
The best location for the ECU is under the dash.
The box must be protected from dirt and moisture,
have adequate space for cooling, and allow for cable
connections.
For optimal Bluetooth performance, mount the ECU
so that the side with the barcode faces away from the
mounting surface as shown above. The ECU can be
oriented in any direction. Do not place it behind or
within large areas of metal.
Mountin g Surfa c e
Bar c ode Mountin g Surfa c e
Bar c ode
6 installing the handsfree car kit
Caution: The location must not interfere with the
vehicle’s air bag.
installing the power adapter cable
Caution: Failure to follow these steps may cause the
accessory not to work properly and could cause
damage to the car kit.
Note: A vehicle adapter harness (not supplied) may
be available from a third-party vendor that allows
integration of the T603 handsfree audio into the
vehicle entertainment system. If you choose to use
a vehicle adapter harness, follow the vendor’s
guidelines for proper installation.
For installation into a vehicle without the use of a
third-party adapter harness :
Microphone
User Interface
Module
(UIM)
Vehicle Entertainment System
Orange: Line Level Handsfree Audio (+)
Blue: Line Level Handsfree Audio (-)
Yellow: Mute
External Speaker
Electronic Control Module
Red: Fuse Box
(Power)
Green: Fuse Box
(Ignition)
Black: Vehicle
Chassis (Ground)
Power Adapter Cable