Quick Reference Guide
5
Back
Mounting the Cradle
To mount the cradle on a vertical (wall) surface:
1.
Connect the power cable to the power port and an AC power source.
2.
Insert the power supply cable ferrite into the power cable ferrite well on the
bottom of the cradle; run the power cable into the cable groove.
3.
Use the template included in the
MT2070/MT2090 Integrator Guide
to
determine the location of the screw holes.
4.
Pre-drill holes to accommodate four screws.
5.
Attach the cradle securely to the surface.
6.
Insert up to four batteries to charge.
Wall Mount
Screw
Supports (4)
Power Cable
Groove
Power
Port
Rubber
Feet
(4)
Power Cable
Ferrite Well
