Doc Title
:
User’s Guide
Revision :
1.0
Model
:
Motorola S70
×
BT
Page(s) :
12 of 29
This document contains confidential and proprietary information of VTech Telecommunications Ltd
Overview of the base
Base LED indicators
1 CHARGING
LED-GREEN
a) Steadily On: When the handset is put into base cradle for charging.
2
IN USE LED-RED
a) Steadily On: During a call or when an extension phone (another registered handset or speaker pod) is
engaged.
b) Flashing at a rate similar to the incoming ring pattern: During an incoming call.
c) Flashing briefly on and off for around 2 minutes: During paging or registration.
3 CELL
1
LED-BLUE
a) Steadily on: When Bluetooth device #1 is paired and connected to the base.
b) Flashes: When Bluetooth device #1 is disconnected.
4 CELL
2
LED-BLUE
a) Steadily on: When Bluetooth device #2 is paired and connected to the base.
b) Flashes: When
Bluetooth device #2 is disconnected.
5 FIND
a)
Press to find/page all registered handsets or the speaker pod. Press the button again, or any key on the
handset or press <TALK ON/OFF> on the speaker pod, to stop paging.
b) Press and hold to enter registration mode.
7-SEG LED DISPLAY
--
Answering machine is OFF.
00
There is no message in the answering machine.
09
Flash in idle: Indicates the number of new answering machine messages. (e.g. there are 9 answering machine messages
in total, with a capacity of 59.)
Steadily On: All the new messages have been listened to and there are 9 answering machine messages in total.
FF
Flashing: The memory of the answering machine is full.
An/09 Flashing:
Indicates an incoming call/recording of an incoming call. The number (e.g. 09) indicates the total number of new
messages.
LA
Flashing: Indicates the handset or line remote access is in progress.
5
1
2
3
4
