35
Advanced settings
3. Enter the master PIN (Default setting 0000) and press
.
4. Scroll to
NUMBER
. Press
.
5. Enter the number. Press
to confirm.
6. Press
to return to standby.
NOTE
If you switch Easy call on,
EASY CALL
will be displayed on your screen in
standby mode. You can not set Easy call
ON
until an Easy call number has
been stored.
8.4.3 Dial an Easy call number
When an Easy call number has been stored and the Easy call setting
switched
ON
, press any key (apart from
), to dial a number.
NOTE
When Easy call is switched
ON
, you can still answer any incoming call as
normal.
8.5 Registration
Up to 5 handsets can be registered to one base station. Additional handsets
must be registered to the base before you can use them.
•
The instructions described below apply specifically to your S3000
handset. If you wish to register another manufacturer’s handset, the
instructions may vary. In this case, please refer to the manufacturer of the
additional handset.
•
The Master PIN is required before you can register or unregister
handsets. The default PIN is 0000.
8.6 Register a handset
At the base:
1. Press and hold the a button on the base station for at least 3 seconds. The
base station emits a beep when it is ready to accept registration. You have
90 seconds in which to register a handset.
At the handset:
1. Press
and scroll to
ADVANCED SET
and press
.
2. Scroll to
REGISTRATION
and press
.
3. Scroll or to display
REGIST. BASE
and press
.
BASE 1 2 3 4
is displayed
and the registered base number is flashing. Enter the number of the base
on which you wish to register your handset.
If you have only 1 base station, press
. If you have 2 base stations,
press
or
, etc.
4. When the display shows
PIN ?
, enter the base PIN and press
.
