manualshive.com logo in svg

Motorola RDM series, Руководство пользователя, Страница: 8 / 78

Поделиться
Скачать
Motorola RDM series Скачать руководство пользователя страница 8

BATTERIES A

ND C

HARGERS 

SAFET

Y

 IN

FO

RM

AT

IO

N

English

            vi

7.

To reduce risk of electric shock, unplug 

the charger from the AC outlet before 
attempting any maintenance or cleaning

OPERATIONAL SAFETY GUIDELINES 

•

Turn the radio OFF when charging battery. 

•

The charger is not suitable for outdoor use. 
Use only in dry locations/conditions. 

•

Connect charger only to an appropriately 
fused and wired supply of the correct 
voltage (as specified on the product). 

•

Disconnect charger from line voltage by 
removing main plug. 

•

The outlet to which this equipment is 
connected should be nearby and easily 
accessible. 

•

Maximum ambient temperature around the 
power supply equipment must not exceed 
40 °C (104 °F). 

•

Power output from the power supply unit 
must not exceed the ratings stated on the 
product label located at the bottom of the 
charger. 

Содержание RDM series















































































Отзывы:

Нет отзывов