background image

WARNING

 

Certain combinations of chemical environments 
can adversely affect thermoplastic resins, the 
material the housing of the radio is made from. 
For this reason, lubricants, cleaning agents, 
solvents or any other material which may come 
in contact with the housing of the radio should 
be carefully evaluated for compatibility. We rec-
ommend a mild dishwashing soap for cleaning 

 

the exterior of the product.

 

Recycling or Disposal of Batteries

 

This portable radio is powered by a nickel-cadmium (Ni-Cad) recharge-
able battery. At the end of its useful life, the battery can be recycled. 
However, recycling facilities may not be available in all areas. Under 
various state or local laws, the battery must be recycled or disposed of 
properly and cannot be disposed of in landfills or incinerators.

In addition, U.S. Environmental Protection Agency (EPA) regulations 
classify used Ni-Cad batteries as hazardous waste, unless certain 
exemptions apply.

Motorola fully endorses and encourages the recycling of Ni-Cad batter-
ies. If you are located in the United States, you can ship post paid your 
used Ni-Cad batteries to INMETCO, an EPA approved recycling facility, 
at this address:

INMETCO
P.O. Box 720
245 Portersville Road
Ellwood City, PA 16117
Telephone: (412) 758-5515
Fax: (412) 758-9311

Consideration should be given to the methods of collecting, labeling, 
and shipping used Ni-Cad batteries. Your federal, state or locate EPA 
should be consulted for specific legal requirements and for recycling 
options in your area.

Motorola, as a responsible corporate citizen, has always been con-
cerned with the protection of the environment. Please feel free to call 
the phone number 1-800-422-4210

 

 

 

for further information.

 

GP300_owners.book  Page 5  Thursday, August 7, 1997  9:49 AM

Содержание RADIUS GP300
















































Отзывы: