Motorola PRO7550 Скачать руководство пользователя страница 21 | Manualshive

Страница: 21 / 70

background image

21

English

RADIO OVER

VIE

W

•

Unsuccessful Power-Up – A short, low-pitched
tone when the radio is first turned on indicates
that the radio has failed its power-up self test
and is not ready for use. Contact your service
representative for service.

•

Transmit on Receive-Only Mode – If you press
the PTT button while tuned to a “receive-only”
mode, you will hear a continuous, low-pitched
alert tone, indicating that no transmission is pos-
sible on this mode. This tone will continue until
the PTT button is released.

•

Transmit Inhibit on Busy Mode – If you press the
PTT button while the mode is busy, you will hear
a continuous, low-pitched alert tone, indicating
that no transmission is possible on this mode.
This tone will continue until the PTT button is
released.

•

Transmit Inhibit on Flat Battery – If you press the
PTT button while the battery is flat, you will hear
a continuous, low pitched alert tone, indicating
that transmission is impossible.

•

Invalid Mode – A continuous, low-pitched tone is
heard when an invalid or unprogrammed opera-
tion is attempted on the radio.

•

Valid (Good) Key Press – A short, medium-
pitched tone when a keypad key is pressed indi-
cates that the key press was accepted.

•

Invalid (Bad) Key Press – A short, low-pitched
tone when a keypad key is pressed indicates
that the key press was rejected.

•

Failsoft (Trunked Systems Only) – A faint “beep-
ing” tone every ten seconds indicates that the
radio is operating in the failsoft mode.

•

Time-Out Timer Warning – Your radio’s time-out
timer limits the length of your transmission time.
When you are pressing the PTT button (trans-
mitting), a short, low-pitched warning tone will
sound four seconds before the allotted time will
expire.

•

Time-Out Timer Timed-Out – If you hold down
the PTT button longer than the time-out timer’s
allotted time, a continuous, low-pitched tone will
sound, indicating that your transmission has
been cut off. This tone will continue until the PTT
button is released.

•

Phone Busy – A “bah-bah-bah-bah” tone when
telephone interconnect is accessed indicates
that all available modes are busy and the radio is
in queue for the next available phone line.

•

Call Alert™ (Page) Received – A group of four
medium-pitched tones every five seconds indi-
cates that your radio has received a Call Alert
page.

«
...
19
20
21
22
23
...
»

Содержание PRO7550







































































Отзывы:

Нет отзывов

Похожие инструкции для PRO7550

Бренд: Icom Страницы: 57

Бренд: Raymarine Страницы: 130

Бренд: Icom Страницы: 65

Бренд: Sangean Страницы: 116

Бренд: Ubiquiti Страницы: 28

Бренд: bca Страницы: 6

Бренд: SenHaiX Страницы: 7

Бренд: König Electronic Страницы: 8

XMRVRFM002 - Commander MT XM Radio Tuner

Бренд: Audiovox Страницы: 91

Бренд: Uniden Страницы: 28

Бренд: Albrecht Audio Страницы: 144

Бренд: Albrecht Страницы: 12

Бренд: Albrecht Страницы: 12

Бренд: Albrecht Страницы: 2

Бренд: Albrecht Страницы: 6

Бренд: Albrecht Страницы: 96

Бренд: Albrecht Страницы: 14

Бренд: Albrecht Страницы: 84

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды