3
2.
Connect and charge
Baby (camera) unit
1. Plug the DC plug of the power adapter into the power socket on the rear of the
baby (camera) unit and plug the other end of the AC adapter into the wall socket.
2. The baby unit turns on and the power indicator lights up in blue and flashes in
red if the parent unit has not been powered up or loss connection with the baby
(camera) unit.
WARNING
Strangulation Hazard. Children have STRANGLED in cords. Keep this cord out of the
reach of children (more than 1 meter or 3 feet away). Do not remove the tags from
the AC Adapters. Only use the AC Adapters provided.
Parent unit
A rechargeable battery is already pre-installed inside the parent unit. When fully
charged, you can move the parent unit without losing the link and picture from the
baby (camera) unit. When charging the battery for the first time, charge for at least
16 hours continuously.
1. Plug the DC plug of the power adapter into the power socket on the side of the
parent unit and plug the other end of the AC adapter into the wall socket.
2. Switch on the AC power and the parent unit will turn on.
3. When the parent unit is fully charged,
will appear steadily on the screen
display.
4. Press and hold the power button on the top of the parent unit to turn it
on and off.
Press and hold
