Motorola P7389, Быстрая справка

Страница: 50 / 112

Using the Options Menu
48 English
Configuring Profiles
1 Scroll up or down using the ª key to highlight Setup and
press
O
to select it.
You will be presented with the following options:
1> [Profile 1]
2> [Profile 2]
3> [Profile 3]
A When this screen first appears there may be no Profile
names displayed. You will be able to enter the profile names
as described below.
A Your service provider may have already configured one or
more profiles which you may not be able to edit as
described.
2 Scroll down using the
ª
key to the profile you wish to
configure and press $ to select it.
You will be presented with the following options:
1 WAP Settings
2 Data Bearer
3 Profile Name
Configuring your WAP settings
1 Scroll down using the
ª
key to 1>WAP Settings and
press O to select it. You will be presented with the
following options:
1 Primary IP:
2 Primary Port:
3 Secondary IP:
4 Secondary Port:
5 Idle Time Out:
2 Scroll down using the ª key to 1>Primary IP: and press
O
to select it. You will be prompted to enter the IP address.
Press and hold C to clear the field and enter the IP address
provided by your ISP. The IP address is in the format
123.123.123.123. After entering the address press
O . You
will return to the previous screen.
3 Scroll down using the ª key to Primary Port and press
O to select it. Press and hold C to clear the field and
enter the number provided by your ISP, then press O . You
will return to the previous screen.
4 Repeat steps 2 and 3 to select and configure the Secondary
IP and Secondary Port .
5 Scroll down using the
ª
key to Idle Time Out: and
press O to select it.
6 Enter the required Idle Time Out and press O . The default is
currently 600 seconds. You will return to the previous screen.
7 Press $ to return to the Profile options screen.
Configuring the Data Bearer
1 Scroll down using the
ª
key to 2>Data Bearer and press
O to select it. You will be presented with the following
options:
1 GPRS
2 CSD