9
Deu
ts
c
h
Spätere Verbindungen mit einem anderen WLAN-Adapter
(Audio- und Datengeräte):
1. Koppeln Sie das WLAN-Gerät ab.
2. Das WLAN-Gerät schaltet nach dem Einschalten automatisch in
den Kopplungsmodus.
3. Führen Sie Schritte 2 – 8 unter „Audiogerät koppeln“ im
vorhergehenden Abschnitt aus.
WLAN-Gerät (Audio- und Datengeräte) abkoppeln):
1. Schalten Sie das WLAN-Gerät aus.
2. Halten Sie die Sendetaste (PTT) gedrückt, während Sie das
WLAN-Gerät einschalten
Wenn das WLAN-Gerät mit einem Funkgerät gekoppelt wurde und
jetzt mit einem anderen Funkgerät gekoppelt werden muss, müssen
die vorherigen Kopplungsinformationen im WLAN-Gerät gelöscht
werden. Dies kann erreicht werden, indem beim Einschalten des
WLAN-Geräts die Sendetaste gedrückt wird. Zur erneuten
Herstellung der WLAN-Verbindung vgl. “AUDIOGERÄT KOPPELN”
auf Seite 7.
Status
LED-Anzeige
(Audio- und separates
PTT-Gerät)
Ton
(Audiogerät)
Nicht gekoppelt
Blaue LED blinkt
Kopplungsbereit-Ton
Kopplung
erfolgreich
Blaue LED leuchtet 2
Sekunden lang
Kopplung-erfolgreich-
Ton
WLAN-
Verbindung mit
Host hergestellt
Blaue LED im
Herzschlagtakt: Lange
AUS und EIN
Verbunden-Ton
WLAN-
Verbindung vom
Host getrennt
Blaue LED leuchtet
Getrennt-Ton alle
2 Minuten für
10 Minuten
Tabelle 3: WLAN-Verbindungs- und Kopplungsanzeigen
68012002054 DE.book Page 9 Friday, April 8, 2011 10:58 AM