Motorola NNTN4846, Руководство пользователя

Страница: 7 / 100

CAR KIT OWNER’S MANUAL 3
Installation
Installation Planning
Before installing, determine how and where you intend to mount the junction
box, visor microphone, antenna, remote PTT button, remote palm microphone
(optional), and speaker (see Figure 1). Plan wire and cable runs to provide
maximum protection from pinching, crushing and overheating.
Figure 1. Car Kit Interconnection Diagram
Refer to the following guidelines when planning the installation:
• Make sure that the car kit fits in the area where it will be mounted and has
enough clearance.
• Use the provided hardware for mounting.
• Ensure that the cables are not stretched, and not subjected to heat from
engine or transmission.
• Crimp connectors securely.
• Do not attach components to any part of the vehicle that is not rigid or is
subject to excessive vibration.
• Do not run cables over sharp edges that could cause wear or chaffing of
cable insulation.
• Do not install the components in locations where they might cause
interference to the operation of the vehicle controls and airbag deployment.
• If it is necessary to penetrate the firewall, check opposite side for cable
clearance before drilling.
• Use a grommet to protect the cable where it passes through the firewall.
Fuse Block
In-Line Fuse
(if connection is made in
(Red)
(Black)
(Orange)
(Green
)
to Positive Supply
Voltage
to Vehicle Chassis
Ground
to Entertainment
Mute
to Ignition
engine compartment)
to Phone
Cradle
to optional
Palm Mic
to External
Push-to-
Talk PTT
to External
Speaker to External
Microphone