manualshive.com logo in svg

Motorola MVME760, Руководство пользователя, Страница: 13 / 48

Поделиться
Скачать
Motorola MVME760 Скачать руководство пользователя страница 13

1

1-1

1

General Information

Introduction

This manual provides general information, hardware preparation,
installation instructions, and support information for the
MVME760 Transition Module.

The MVME760 module is used as the interface between host
VMEmodules and various peripheral devices. A 64-pin ribbon
cable (P/N 30-W2514B02, 17” length) connects the MVME760
Transition Module to the host VMEmodule.

Features of the MVME760 Module

The features of the MVME760 module include industry-standard
connectors that interface to:

❏

Two EIA-232 asynchronous serial ports

❏

Two synchronous serial ports

❏

One parallel port (IEEE Standard 1284-I compliant)

❏

Ethernet interface (both AUI and 10BaseT)

❏

Two 60-pin connectors are provided to support existing MCG
Serial Interface Modules. Currently, there are four types of
SIMs available: EIA-232 DCE, EIA-232 DTE, EIA-530 DCE,
and EIA-530 DTE. The selection of these modules determines
the functionality of the two synchronous serial ports.

Содержание MVME760

















































Отзывы:

Нет отзывов