manualshive.com logo in svg

Motorola MVME167 Series, Руководство пользователя, Страница: 66 / 84

Поделиться
Скачать
Motorola MVME167 Series Скачать руководство пользователя страница 66

MVME167 Functional Description

MVME167/D3

4-7

4

Support functions for the 53C710 are provided by the PCCchip2. Refer to the 53C710 
user’s guide and to the MVME166/MVME167/MVME187 Single Board Computers 
Programmer’s Reference Guide for detailed programming information. 

SCSI Termination

The system configurer must ensure that the SCSI bus is properly terminated at both 
ends. On the MVME167, sockets are provided for the terminators on the P2 transition 
board. If the SCSI bus ends at the P2 transition board, then termination resistors must 
be installed on the P2 transition board. +5V power to the SCSI bus TERM power line 
and termination resistors is provided through a fuse located on the P2 transition board. 

Local Resources

The MVME167 includes many resources for the local processor. These include tick 
timers, software programmable hardware interrupts, watchdog timer, and local bus 
timeout. 

Programmable Tick Timers

Four 32-bit programmable tick timers with 1 

µ

s resolution are provided, two in the 

VMEchip2 and two in the PCCchip2. The tick timers can be programmed to generate 
periodic interrupts to the processor. Refer to the VMEchip2 and PCCchip2 in the 
MVME166/MVME167/MVME187 Single Board Computers Programmer’s Reference 
Guide for detailed programming information. 

Watchdog Timer

A watchdog timer function is provided in the VMEchip2. When the watchdog timer is 
enabled, it must be reset by software within the programmed time or it times out. The 
watchdog timer can be programmed to generate a SYSRESET signal, local reset 
signal, or board fail signal if it times out. Refer to the VMEchip2 in the 
MVME166/MVME167/MVME187 Single Board Computers Programmer’s Reference 
Guide for detailed programming information. 

Software-Programmable Hardware Interrupts

Eight software-programmable hardware interrupts are provided by the VMEchip2. 
These interrupts allow software to create a hardware interrupt. Refer to the VMEchip2 
in the MVME166/MVME167/MVME187 Single Board Computers Programmer’s 
Reference Guide for detailed programming information. 

Local Bus Timeout

The MVME167 provides a timeout function for the local bus. When the timer is 
enabled and a local bus access times out, a Transfer Error Acknowledge (TEA) signal 
is sent to the local bus master. The timeout value is selectable by software for 8 

µ

sec, 

64 

µ

sec, 256 

µ

sec, or infinite. The local bus timer does not operate during VMEbus 

Содержание MVME167 Series





















































































Отзывы:

Нет отзывов