8
E
n
glis
h
Blinking ORANGE Indicator?
1.
The battery temperature may be below 5 °C (41 °F) or above 40 °C
(104 °F).
2.
The battery voltage may be lower than the predetermined threshold level
for rapid charging.
3.
Additional case for new ultra-high-capacity IMPRES Lithium-ion (Li-ion)
batteries. The new batteries have capacities exceeding 2000 mAh. After
approximately 15 minutes, the LED may go into a Flashing Red mode.
Remove and reinsert to get another over-discharge recovery period.
This procedure may need to be repeated several times.
Note
: Rapid charging outside of the stated temperature and voltage limits can
drastically reduce the life expectancy of the battery. When this condition
is corrected, the battery will begin charging automatically (
STEADY RED
indication).
CHARGING POCKET INSTALLATION
Removing Charging Pocket from Multi-Unit Charger
1.
Remove the screw that secures the Charging Pocket to the base.
2.
Lift the Charging Pocket a few inches away from the base.
3.
Remove the Pocket Harness by pulling straight up on the connector
(refer to Figure 4).
Securing Charging Pocket to Multi-Unit Charger
1.
Connect Pocket Harness by plugging in the connector to the receptacle
on Multi-Unit Charger (refer to Figure 4).
2.
Slot in the Charging Pocket to the base and ensure the Charging Pocket
is flushed in to the Multi-Unit Charger. Affix the Charging Pocket screw.
To reduce risk of electric shock, unplug the charger from the
AC outlet before removing or replacing Charging Pocket.
W A R N I N G
Содержание Multi-Unit Charger
Страница 1: ...Multi Unit Charger User Guide EN LAS BP FR ES IT DE RU JP ...
Страница 2: ......
Страница 117: ......
Страница 118: ...m 68012009052 68012009052 B ...