Motorola MTX1550, Руководство пользователя

Страница: 46 / 146

TE
LE
PHONE
OP
ERATIO
N
44
English
Sending the Telephone Number Using a Location in
the Telephone List
Having the Conversation and Hanging Up
Note: You can press the pre-programmed phone
button for quick access to the telephone call
feature. This takes you directly to Step 3.
• The “ PLEASE WAIT ” message is a timed
message. If you cannot access the
telephone system (no dial tone heard),
press
key or the phone button to
hang up, and start again at Step 1 of this
procedure.
• If you are out of range of the trunked
system or the phone interconnect is out of
service, “
NO PHONE ” is displayed and a
continuous low-pitched tone sounds.
• If the trunked phone interconnect is in use,
a busy tone sounds and “
PHONE BUSY ” is
displayed.
6a Press
,
or
/
, to enter the telephone
list.
6b Enter the location (any preprogrammed
location from 1 through 19) of the number you
wish to call.
6c The radio goes to the selected location.
6d The display alternates
between showing the
member’s name and
telephone number. Alternates between
and
6e Press the PTT button.
6f The telephone number
will be sent out; you will
hear tones as they are
sent.
6g If you hear a busy signal, go to Step 8 for
hang-up procedure.
POLICE DEPT
5556445
POLICE DEPT
7 If call is answered, communicate in the normal
manner. Press the PTT switch to talk; release
the PTT to listen.
8 When finished with your conversation, or if the
number you called is busy or does not answer,
press
or the phone button to send the
hang-up code.
9 The radio returns to the
home display.
PLANT POLICE
20L01-A_PR_UG_MTX4500.book Page 44 Friday, April 13, 2007 2:47 PM