www
.motorolasolutions.com
www
.motorolasolutions.com
m
MTP8500 Ex
QUICK START GUIDE
Icons
Using the T
erminal
More Information on the Radio
Learning Experience Portal
*MN002024A01*
MN002024A01-BC
This document is copyright protected. Duplications for the purpose of the use of Motorola Solutions products
are permitted to an appropriate extent. Duplications for other purposes, changes, additions or other
processing of this document are not permitted. Only this electronically-saved document is considered to be
the original. Duplications are considered merely copies. Motorola Solutions, Inc., and its subsidiaries and
affiliates do not vouch for the correctness of such kinds of copies.
MOTOROLA, MOTO, MOTOROLA SOLUTIONS and the Stylized M Logo are trademarks or registered trademarks of
Motorola Trademark Holdings, LLC and are used under license. All other trademarks are the property of their respective
owners.
© 2015 and 2021 Motorola Solutions, Inc. All rights reserved.
User documentation available at:
https://learning.motorolasolutions.com/
Open Source Software Legal Notices
Available in Customer Programming Software Plus (CPS Plus) DVD.
Visit the Motorola Solutions Web site at:
http://www.motorolasolutions.com/
Icon
Description
New Message Has Arrived
New Message(s)
Packet Data Enabled
Packet Data Transmitting
Selected Icons
High RF Power
Icon
Description
In Service (TMO)
No Service (TMO)
Signal Strength
Direct Mode (DMO)
Emergency Mode
Battery Level (Front/Top Display)
Battery Charging (Front/Top Display)
Duplex Ring Muted
Simplex Ring Muted
All Ring Muted
Low Audio
Migration
High Audio
Scan (TMO)
Priority Scan (TMO)
Earpiece Connected
Radio Keys Locked
Location
IN DMO:
From the home screen, dial a number using Software Numeric Keypad (a
shortcut needs to be assigned to a Function Key or a Navigation Key - refer to the
Feature User Guide for details). Press and hold
PTT
to make the call and talk (wait for
the talk permit tone if configured). Release
PTT
to listen. Press the
End
key to
terminate the call.
IN TMO:
From the home screen, dial a number using Software Numeric Keypad (a
shortcut needs to be assigned to a Function Key or a Navigation Key - refer to the
Feature User Guide for details). Press and release
PTT
to make the call. Wait for the
called party to pick up. Once the call is connected, press and hold
PTT
to talk (wait for
the talk permit tone if configured). Release
PTT
to listen. Press the
End
key to
terminate the call.
Making Duplex Private/Phone/PABX Calls
Turning the Radio On/Off
To power the radio on/off, press and hold
On/Off
key.
Using the Radio Menu
To enter the menu, press the
Menu
key.
To scroll through the menu, press the Up or Down Navigation key.
To select a menu item, press
Select
or the Right Navigation key.
To return to the previous level, press
Back
or the Left Navigation key.
To exit the menu, press the
Home
key.
Selecting Trunked/Direct Mode Operation
From the home screen, press
Optns
, then select Trunked Mode or Direct Mode.
Making Simplex Private Calls
Making TMO/DMO Group Calls
Enter TMO or DMO. From the home screen, use the Talkgroup Knob or Navigation
keys to highlight the target talkgroup. Press
Select
(if configured). Press and hold
PTT
. Wait for the talk permit tone (if configured) and talk. Release
PTT
to listen.
Making TMO/DMO Emergency Group Calls
Sending Status Messages
Select the target talkgroup, then press the
Menu
key and select
Messages
>
Send
Status
. Highlight a status message and press the
Send
key or
PTT
to send it.
Sending SDS Messages
From the home screen, press the
Menu
key. Select
Messages
>
New Message
.
Enter your message and select
Send
. Select
Private
or
Group
. Enter a Private ID
or choose a group.
Enter TMO or DMO. Press and hold the
Emergency
button. The emergency alarm
is sent automatically (if configured). Press and hold
PTT
. Wait for the talk permit
tone (if configured) and talk. Release
PTT
to listen.
If using the Hot Mic feature, wait for the “Emgcy Mic On” message to appear on the
display, then talk without pressing
PTT
.
To exit the emergency mode, press and hold the
Exit
soft key.
From the home screen, dial a number using Software Numeric Keypad (a shortcut
needs to be assigned to a Function Key or a Navigation Key - refer to the Feature User
Guide for details). Change the call type by pressing
Ctype
. Press and release the
Send
key. The ringing sounds. The called party answers. Press the
End
key to terminate the
call.
To answer an incoming call, press the
Send
key.
Pairing Your Radio with Bluetooth Devices
From the home screen, press the
Menu
key and select
Bluetooth
>
Add Device
.
Highlight the required device and select
Pair
. If needed, enter a PIN code or a passkey.
Using the Top Display
The radio is equipped with a secondary display placed at the top.
Use it to check for key information, such as the battery level, volume
level, signal strength, talkgroup name, or radio status.
Bluetooth No/Active Connection
MTP8500Ex_QuickStartGuide.ai 2 09-Apr-21 4:36:06 PM
MTP8500Ex_QuickStartGuide.ai 2 09-Apr-21 4:36:06 PM
Содержание MTP8500 Ex
Страница 1: ...MTP8500 Ex QUICK START GUIDE ...
