Motorola MTP3100 Скачать руководство пользователя страница 123

Страница: 123 / 132

Appendix A

Tones

NOTICE:

The radio has two tone packs which are the default Classic Tones and New Tones.

Your service provider decides which tone pack is enabled. To listen to the audio signal tones

samples, click

Table 24: Radio Tones

New Tone

Classic Tone

Tone Description

Default Beep – Played when pressing a key.

Invalid Action
Examples:

• Pressing an invalid key.

• Dialing an invalid number.

• Talk prohibit.

System Notification
Examples:

• The radio changes its status from out-of-range to in service.

• The radio returns to the home network.

• Toggling between TMO and DMO modes.

System Error
Examples:

• The radio changes its status from in service to out-of-range.

• Call disconnected.

General Notification
Examples:

• Entering Local Site Trunking.

• Entering Transmit Inhibit Mode.

Positive Notification – Message sending succeeded.

Negative Notification – Message sending failed.

Item Received – A new message received.

Talk Permit – The radio user is allowed to transmit after pressing
the PTT button.

Clear-to-send – Data transmission is ready to begin.

Emergency – Emergency Call received.

Table continued…

68015000897–FC

Tones

Send Feedback

123

Содержание MTP3100




































































































































Результаты поиска

Содержание MTP3100

Отзывы:

Motorola MTP3100, Руководство пользователя, Страница: 123 / 132

Результаты поиска

Содержание MTP3100

Отзывы: