30
English
The TXI Mode remains active at power
On
. You will be asked
whether to leave the TXI Mode
On
or not.
Press the
Yes
soft key to deactivate the TXI Mode. If the MTH800
L
was previously used in Trunked Mode, it will register to the network.
If the MTH800
L
was previously used in Direct Mode, it will remain in
Direct Mode.
Press
No
in Trunked Mode and the MTH800
L
powers down; press
No
in Direct Mode and you remain in Direct Mode with TXI selected.
Unlocking the MTH800
L
Your MTH800
L
may be locked at power up.
To unlock the MTH800
L
after powering on, enter the code at the
prompt. The MTH800
L
enters the default Home display.
The unlock code is originally set to 0000. Your Service Provider may
change this number before you receive your terminal.
Locking/Unlocking the Keypad
To prevent accidental key/button presses:
Press
to lock the keypad. Press again
to
unlock. Service Provider can choose the notification for the Keypad
lock and if to lock the
PTT
.
Keypad Lock Notification
When the keypad is locked one of the following instructions is
displayed:
• None – no notification is display.
• Notification Only –
Keys Locked
is displayed.
Notification and Instruction –
Keys Locked, Press Menu and * to
lock/unlock
is displayed.
Automatic Keylock
This feature locks the keypad automatically after not using it for a
predefined time. To turn it on/off or to set the delay go to
Menu >
Security > Keylock Setup.
Ensure you have left the RF sensitive area
before deactivating Transmit Inhibit.
MENU
MENU