Power up your MR2600
Now connect the supplied power cube between
the MR2600’s
power jack and a working electrical outlet. The MR2600
should power up and the Status light on the top of the unit
below the Motorola logo should turn on or blink. When
blinking, it is on but not connected to the Internet. When the
light is solid, it is on and connected to the Internet.
Most users should use the MR2600’s default Internet settings.
In the very unlikely event that your service provider assigned
you a static IP address or you need to terminate a PPPoE
Internet connection, see the full-length User Manual at
www.motorolanetwork.com/MR2600manual .
