Motorola MK4000 MicroKiosk, Руководство по продукции

Страница: 112 / 136

B - 44 MK4000 MicroKiosk for CE .NET 5.0 Product Reference Guide
Known APs Window
The
Known APs
window displays the APs in range using the same ESSID as the device. This window is only
available in
Infrastructure
mode. To open the
Known APs
window, tap
Known APs
in the
Wireless Diagnostics
window.
Figure B-39
Known APs Window
See Table B-23 for the definitions of the icons next to the AP.
Tap and hold on an AP to display a pop-up menu with the following options:
Set Mandatory
and
Set Roaming
.
Select
Set Mandatory
to prohibit the device from associating with a different AP. The letter
M
displays on top of
the icon. The device connects to the selected AP and never roams until:
•
You select
Set Roaming.
•
You select
Set Mandatory
on a different AP.
•
You manually connect to a profile from the
Manage Profiles
page.
•
The device roams to a new profile.
•
The device resumes after being suspended.
•
The device resets (warm or cold).
Select
Set Roaming
to allow the device to roam to any AP with a better signal. These settings are temporary
and never saved to the registry.
Tap
Refresh
to update the list of the APs with the same ESSID.
Table B-23
Current Profile Window
Icon Description
The AP is the associated access point, and is set to mandatory.
The AP is the associated access point, but is not set to mandatory.
The device is not associated to this AP, but the AP is set as mandatory.
The device is not associated to this AP, and AP is not set as mandatory.