Mesh Enabled Access
Vehicle Mounted Modem Users Guide
3.5 External Device Provisioning
The
External Device Provisioning
section of the
VMM Device Administration
page is used to
configure addresses for the attached nodes on the local Ethernet segment. Up to three
addresses are provisioned.
Figure 3-10. External Device Provisioning Table
The
Enable
checkbox indicates this row contains a valid address. Any address can be disabled
by clearing the checkbox. The pull-down menu options indicate whether this address will be
offered via the local DHCP service (“Local-DHCP”) or “Statically-Provisioned”.
The
Statically-Provisioned
setting is used to support devices that do not use DHCP to acquire
an address.
The MAC address field is used for
Local-DHCP
addresses, so that the IP address can be
reserved for a specific device. The
reserved
checkbox must be marked for this kind of IP
address reservation. The
Status
field indicates whether the provisioned IP address was
19
Содержание MEA 3.1
Страница 1: ...MEA 3 1 Vehicle Mounted Modem Users Guide Documentation Revision 3 1 7 ...
Страница 2: ......
Страница 4: ......
Страница 31: ...Mesh Enabled Access Vehicle Mounted Modem Users Guide Figure 3 13 MeshTray Authentication Activity tab VMM 23 ...