Using the Menu
USING THE MENU
The menu can only be accessed from standby mode.
In this section you will find instructions on how to use the following menus:
Phone book, Call log, Timer, Handset settings, Base settings and Function menu.
PHONE BOOK MENU
The phone book stores up to 100 contact names - for each contact name you can store
3 different contact numbers, for example: home, office and mobile numbers.
Once you have stored your names and numbers, you can sort your contacts into caller
groups and assign each caller group a different ringtone.
Storing Entries
There are two ways to store a phone book entry: Using the Phone book menu and
from standby mode.
Using the phone book menu:
1. Press the
or
key until Add is displayed and press the
key to select.
Note: If the phone book is full, Memory full will be displayed for 2 seconds,
then the display reverts to the previous menu screen.
2. Enter a contact name (max. 16 characters) and press
to confirm.
Entering Names and Numbers
To enter characters, press the relevant key the corresponding number of times
according to the position on the key. For example, to enter an L, press the
5
key three
times or to enter a B press the
2
key twice.
Delete incorrect digits by pressing the
key.
Press the
*
key to switch between lower/upper case and number only entry.
If 2 consecutive characters are on the same key, enter the first character, then wait for
the cursor to move to the right before trying to enter the next character.
Press the
1
key or
key repeatedly to enter punctuation symbols.
Press the
0
key twice to enter a space.
3. Enter the first number for this name (max. 24 digits) and press
to confirm.
4. Repeat point 3 to enter 2 further numbers for the name.
Or
If you do not want to enter any further contact numbers, press
twice to go
directly to the 'Set Group' menu.
Entering a Dialling Pause (P)
If the telephone is connected to a switchboard/PBX network, it may be necessary to
insert a pause in the dialling sequence.
When entering a number, press and hold the
key where a pause is required.
A "P" will be displayed.
5. Press
or
to select a caller group and press
to select.
6. Press the
key to return to standby mode.
14
