Motorola MC9190-NI Скачать руководство пользователя | Manualshive

Страница: 19 / 52

background image

User Guide

19

Bluetooth

®

Wireless Technology for use through the EEA has the following restrictions:

• Maximum radiated transmit power of 100mW EIRP in the frequency range 2.400 -2.4835 GHz
• France, outside usage is restricted to 10mW EIRP
• Italy requires a user license for outside usage.

Radio Frequency Interference Requirements-FCC

Note: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference

to radio communications. However there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one
or more of the following measures:
• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and receiver
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
• Consult the dealer or an experienced radio/TV technician for help.

Radio Transmitters (Part 15)

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.

Radio Frequency Interference Requirements- Canada

This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

Radio Transmitters

For RLAN Devices:
The use of 5 GHz RLAN’s, for use in Canada, have the following restrictions:
• Restricted Band 5.60 – 5.65 GHz
This device complies with RSS 210 of Industry & Science Canada. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Label Marking: The Term “IC:” before the radio certification only signifies that Industry Canada technical
specifications were met.

«
...
17
18
19
20
21
...
»

Содержание MC9190-NI





















































Отзывы:

Нет отзывов

Похожие инструкции для MC9190-NI

Бренд: Ortus Страницы: 11

FlashMover 16-in-1 USB2.0

Бренд: Microdia Страницы: 2

BOOKMAN ENC-2046

Бренд: Franklin Страницы: 22

Бренд: Rosewill Страницы: 1

Бренд: NOOK Страницы: 124

USB RFID Reader

Бренд: ThingMagic Страницы: 16

Бренд: Lindy Страницы: 2

2126800 - Media Reader 7500

Бренд: Adaptec Страницы: 20

Бренд: IDTECH Страницы: 137

Бренд: TrekStor Страницы: 29

Бренд: Kyungwoo Страницы: 7

Бренд: Sandberg Страницы: 12

Бренд: Agrident Страницы: 43

Media X-Change 2.0

Бренд: Kanguru Страницы: 17

Lector61 Series

Бренд: SICK Страницы: 80

Бренд: SICK Страницы: 82

Бренд: SICK Страницы: 78

Бренд: SICK Страницы: 96

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды