Motorola MC75 - Worldwide Enterprise Digital Assistant, Руководство пользователя, Страница: 29 / 202

Getting Started 1 - 9
Micro Secure Digital (microSD) Card
The microSD card slot provides secondary non-volatile storage. The slot is located on the side of the MC75 (see
Figure 1-7 ). Refer to the documentation provided with the card for more information, and follow the manufacturer’s
recommendations for use.
To install the microSD card:
1.
Power off the MC75.
2.
Remove the memory card cover on the side of the MC75 by loosening the two captive screws.
Figure 1-7
Card Installation
3.
Insert the card with the card contacts facing up and the cut corner on the left, until you feel a click.
4.
Replace the memory card cover and tighten the screws.
To remove an microSD card:
1.
Power off the MC75.
2.
Remove the memory card cover by loosening the screws.
Figure 1-8 Card Removal
3.
Carefully press and release the card to eject it.
4.
Remove the card from the card slot.
5.
Replace the memory card cover and tighten the screws.
CAUTION Follow proper ESD precautions to avoid damaging the microSD card. Proper ESD precautions
include, but are not limited to, working on an ESD mat and ensuring that the operator is properly
grounded.