Motorola MC50 Скачать руководство пользователя | Manualshive

Страница: 55 / 98

background image

Accessories

3 - 5

Battery Charging Indicators

The Single Slot USB Cradle charges the mobile computer’s main battery and a spare battery simultaneously.

The mobile computer’s charge LED indicates the status of the battery charging in the mobile computer. See

Table 1-2 on page 1-5

for charging status indications.

The spare battery charging LED on the cradle indicates the status of the spare battery charging in the cradle.
See

for charging status indications.

The standard battery fully charges in approximately 3.5 hours and the extended capacity battery fully charges
in approximately seven hours.

Four Slot USB Cradle

This section describes how to use a Four Slot USB cradle with the mobile computer. For cradle communication
setup procedures refer to the

MC50 Integrator Guide

.

The Four Slot USB cradle:

•

Provides 12 VDC power for operating the mobile computer.

•

Enables data communication between the mobile computer (up to four) and a host computer, using a
USB connection.

•

Synchronizes information between the mobile computer and a host computer. (With customized or third
party software, it can also synchronize the mobile computer with corporate databases.)

•

Simultaneously charges up to four batteries in the mobile computer.

Table 3-1

Spare Battery LED Charging Indicators

Spare Battery LED

(on cradle)

Indication

Off

No spare battery in slot; spare battery not placed correctly; cradle is not
powered.

Solid Amber

Spare battery is charging.

Flashing Amber

Error in charging; check placement of spare battery.

Solid Green

Spare battery is fully charged.

NOTE

Use only a Motorola-approved power supply (p/n 50-14000-148) output rated 12 VDC and minimum
3.33A. The power supply is certified to EN60950 with SELV outputs. Use of alternative power supply will
invalidate any approval given to this device and may be dangerous.

HINWEIS

Benutzen Sie nur eine von Motorola genehmigte Stromversorgung (Teilenr. 50-14000-148) mit einer
Ausgangsleistung von 12 V (Gleichstrom) und mindestens 3.33A. Die Stromversorgung ist nach
EN60950 für die Verwendung in SELV-Stromkreisen zertifiziert. Bei Verwendung eines anderen
Netzteils werden alle für das Gerät gewährten Genehmigungen außer Kraft gesetzt, und der Betrieb
kann gefährlich sein.

«
...
53
54
55
56
57
...
»

Содержание MC50



































































































Отзывы:

Нет отзывов

Похожие инструкции для MC50

Бренд: Hytera Страницы: 18

GTP-6200 Series

Бренд: S4A Страницы: 47

TeamPad500 System

Бренд: Fujitsu Страницы: 47

TeamPad PBT7500-16

Бренд: Fujitsu Страницы: 63

Бренд: Fujitsu Страницы: 60

Pocket LOOX 600

Бренд: Fujitsu Страницы: 73

Бренд: Fujitsu Страницы: 206

Arrows NX F-01J

Бренд: Fujitsu Страницы: 218

Бренд: Innovision Страницы: 40

Бренд: Symbol Страницы: 44

Бренд: Intermec Страницы: 2

Бренд: Psion Teklogix Страницы: 11

Бренд: Psion Teklogix Страницы: 278

Бренд: Denso Страницы: 219

Бренд: Denso Страницы: 256

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды