Motorola MC3000 Скачать руководство пользователя страница 119

Страница: 119 / 152

Maintenance and Troubleshooting

5 - 3

During data

communication, no data

was transmitted, or

transmitted data was

incomplete.

Mobile computer

removed from cradle

or unplugged from

host computer during

communication.

Replace the mobile computer in the cradle, or reattach the cable

and re-transmit.

Incorrect cable

configuration.

See the system administrator or refer to the

MC3000 Integrator

Guide.

Communication

software was

incorrectly installed or

configured.

See the system administrator or refer to the

MC3000 Integrator

Guide.

Mobile computer does

not emit sound.

Volume setting is low

or turned off.

Mobile computer may be a beeper only configuration or incorrect

setting is programmed into device.

Mobile computer turns

itself off.

Mobile computer is

inactive.

The mobile computer turns off after a period of inactivity. This

period can be set from one to five minutes, in one-minute

intervals.

Battery is depleted.

Recharge or replace the battery.

Battery is not inserted

properly.

Insert the battery properly. For more information see,

Install Main

Battery on page 1-5

Tapping the window

buttons or icons does

not activate the

corresponding feature.

Touch screen not

calibrated correctly.

Re-calibrate the screen.
From the mobile computer,

Demo window

double-tap the

Ctl

Panel

icon and double-tap on

Touch Calibrate

. Follow the screen

prompts.

The system crashed.

Warm boot the system. To perform a warm boot, see

Resetting

the Mobile Computer on page 2-34

A message appears

stating that the mobile

computer memory is

full.

Too many files stored

on the mobile

computer.

Delete unused memos and records. If necessary, save these

records on the host computer.

Too many

applications installed

on the mobile

computer.

Remove unused installed applications from the mobile computer

to recover memory.

Table 5-1 Troubleshooting the Mobile Computer (Continued)

Problem

Cause

Solution

Содержание MC3000

























































































































































Результаты поиска

Содержание MC3000

Отзывы:

Бренды по названию

Популярные бренды

Motorola MC3000, Руководство пользователя

Результаты поиска

Содержание MC3000

Отзывы:

Бренды по названию

Популярные бренды