Motorola MBP853CONNECT, Руководство пользователя, Страница: 13 / 364

Getting Started 13
ENGLISH
When charging
1. During power OFF, and the adapter is plugged in, an adapter logo will display
on-screen and then a flashing battery logo will display for 45 sec. The Blue LED
at the top left corner will light up, indicating that the adapter is plugged in.
2. Whilst the power is ON, and the adapter is plugged in, the battery icon at the
top right corner of the screen will show that the battery is charging. The Blue
LED at the top left corner will light up to indicate that the adapter is plugged in.
2.4 Registration (Pairing)
The Baby monitor is pre-registered to your Parent Unit. You do not need to
register it again unless the Baby Unit loses its link with the Parent Unit.
To re-register your Baby Unit, or register a new Baby Unit, follow the procedure
below:
1. Press the
M
button of the Parent Unit and the menu bar will pop up.
2. Press the LEFT button or RIGHT button until is highlighted, and
the
/ / /
menu will pop up.
3. Press the UP button or DOWN button to select , and press the
O
button to confirm.
4. / / / will pop up, press the UP button or DOWN button
to select the desired CAM and press the
O
button to start searching for
a camera unit. The green audio level LED will flash rapidly while searching.
5. Press the
O
button to confirm.
6. Press and hold the PAIR button underneath the Baby Unit until the Parent
Unit finds the camera, beeps and the video from the camera appears.
NOTE
If a particular Baby Unit was registered previously, registering this current
Baby Unit again will overwrite the old registration.
2.5 View Video Through TV
Connect a suitable AV cable into the AV OUT socket on the side of the Parent
Unit and into the AV input of the TV. Scroll to select
on the Parent Unit and
press
O
button to confirm, the display screen goes off. Scroll through the AV
inputs on the TV menu until the Baby monitor picture is visible. AV cable is an
optional accessory, which is to be purchased separately.
del
add view scan
add
cam
*1
cam
2
cam
3
cam
4
V
:<