USING YOUR DIGITAL PHOTO FRAME
17
3.5
Switching monitoring camera unit
The system allows registering up to four camera units. You
can switch the monitoring camera unit by one-touch key or
by menu settings:
By one-touch key:
Press the
P
button at the back of the digital photo frame
or the
button on the remote control when the digital
photo frame is in video monitoring mode. The digital photo
frame will switch to the next registered camera unit and
show the video from it after a few seconds. You can switch
to other registered camera units by further pressing
P
or
if necessary, with each registered camera unit being
selected in turn.
By menu settings:
The system also allows the digital photo frame to be set to
automatically switch through among all the camera units,
with each registered camera unit being selected in turn at
about 30 second intervals. Refer to section 4.6 for the
related instructions of how to set the digital photo frame to
scan through all the camera units automatically.
3.6
Registering a camera unit
IMPORTANT
When you purchase your digital photo frame system, all
cameras are already registered to the digital photo frame,
so you do not need to register them.
Camera registration is only necessary if one has become
faulty or if you buy a new one.
You can register up to 4 cameras to the digital photo frame.
To register a camera unit:
1.
Refer to section 4.6 to access the submenu
Registration
.
2.
Press
P
to confirm. The digital photo frame will
display
Registration Mode
, and then display
Registering...
which
indicates it has entered the registration mode.
3.
Press and hold
>
on the camera unit until its power
indicator starts to flash quickly.
4.
The digital photo frame will display
Registered
when the
registration is successfully completed, and the camera
will be assigned a camera unit number, which can be
checked from the digital photo frame.
