12
Getting Started
2.3
Registration (Pairing)
The Baby Monitor is pre-registered to your Parent Unit. You do not need to
register it again unless the Baby Unit loses its link with the Parent Unit.
To re-register your Baby Unit, or register a new Baby Unit, follow the procedures
below:
1.
Press the
M
button of the Parent Unit and the menu bar will pop up.
2.
Press the
<
LEFT button or
>
RIGHT button until
is highlighted, and
the
del/
add/
view/
scan
menu will pop up.
3.
Press the
+
UP button or
-
DOWN button to select
add
, and press the
O
button to confirm.
4.
Camera
will pop up, press the
+
UP button or
-
DOWN
button to select the desired Camera and press the
O
button to start
searching for a camera unit.
Note:
If a camera is currently paired with the Parent Unit, its camera
location (with a * against it) cannot be selected for a new registration.
5.
Press the
O
button to confirm.
6.
Press and hold the
PAIR
button underneath the Baby Unit until the Parent
Unit finds the camera, beeps and PAIR OK appears on the screen. The
video from the camera will then appear.
NOTE
If a particular Baby Unit was registered previously, registering this current
Baby Unit again will cancel its old registration.
/ / /
