Motorola MBP43-B, Руководство пользователя

Страница: 15 / 27

Owner Unit Menu Options 15
ENGLISH
4.6.3 Delete a camera
1. Press the
M
Menu button and the menu bar will pop up.
2. Press the
<
LEFT button or
>
RIGHT button until is highlighted, and
the / / / menu will pop up.
3. Press the
+
UP button or
-
DOWN button to select , and press the OK
button to confirm.
4. 1 / 2 / 3 / 4 will pop up, press the
+
UP button or
-
DOWN button
to select the desired CAM, and press the OK button to select.
5. Press the
+
UP or
-
DOWN button to select the desired CAM, and press
the OK button to delete that registration.
4.6.4 Scan the cameras
1. Press the
M
Menu button and the menu bar will pop up.
2. Press the
<
LEFT button or
>
RIGHT button until is highlighted, and
the / / / menu will pop up.
3. Press the
+
UP button or
-
DOWN button to select , and press the OK
button to confirm.
4. The screen will then display images from each registered camera in a loop,
changing about every 12 seconds.
TIP
Press OK repeatedly for a quick way to go to Scan mode without using the menu.
NOTE
If the owner unit is in scan mode and one of the registered cameras
is turned off or out of range, the scan will stop at the missing camera, display "no
signal - check or del cam 1" (if camera 1 is missing), and emit a a warning beep
every 5 seconds.
WARNING
Check the camera and correct the fault immediately if you are using that
camera to monitor your
Baby
.
If you want to continue in camera scan mode without that camera, delete the
camera (see 4.6.3 Delete a camera) and start the scan again.
4.7 Temperature
1. Press the
M
Menu button and the menu bar will pop up.
2. Press the
<
LEFT button or
>
RIGHT button until is highlighted.
3. Press the
+
UP button or
-
DOWN button to select °C or °F.