manualshive.com logo in svg

Motorola MBP27T, Руководство пользователя

Поделиться
Скачать
Motorola MBP27T Скачать руководство пользователя страница 10

10

Getting Started

4.

If there is not a connection or you are out of range, the video display will go 
off, the symbol 

 will flash on the LCD display, and the unit will beep 

every 9 seconds. (If the unit is on scan 

 the 

 

1 ?

 symbol displays.) 

Move the Parent Unit closer to the Baby Unit the link is re-established.

5.

Press and hold the 

P

 POWER ON/OFF button, until the progress bar 

scrolls fully across, to turn OFF the Parent Unit.

NOTE

The battery icon 

 will turn RED, flash, and beep approximately every 5 

seconds to indicate the battery is low and needs to be recharged. The battery 
pack will take approximately 16 hours to charge.

When charging

1.

If the Parent Unit is turned OFF, when the adapter is plugged in, it displays 
a "mains plug" icon briefly, then a large battery icon with internal segments 
cycling for 60 seconds, before the display goes blank. Note, the unit 
continues to charge. The Blue LED at top left corner will light up to indicate 
the adapter is plugged in.

2.

If the Parent Unit is turned ON, when the adapter is plugged in, the battery 
icon in the screen's top right corner will show that the battery is charging by 
cycling the internal segments. The segments stop cycling when the battery 
is fully charged. The Blue LED at top left corner will light up to indicate the 
adapter is plugged in.

0

Содержание MBP27T





































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды