Getting Started
4.
If there is no connection or you are out of range, the video display
will go off and the symbol
will flash on the LCD display, and
the unit will beep every 9 seconds. (If the unit is on scan
until the link is re-established.
5.
Press and hold the
P
POWER ON/OFF button, until the progress
bar scrolls fully across , to turn OFF the parent unit.
NOTE
The battery icon
turns RED and flashes to indicate that the battery
for 60 sec. The
0
symbol displays.) Move the parent unit closer to the baby
When charging
1.
10
Getting Started
1 ?
the
is low, and it gives a beep every 16 seconds. The battery needs to be
recharged. battery pack takes about 16 hours to charge fully.
If the parent unit is turned OFF, when the adapter is plugged in, it
displays a "mains plug" icon briefly, then a large battery icon with
internal segments cycling for 60 seconds, before the display goes
blank, but the unit continues to charge. The Blue LED at top left
corner lights up to indicate adapter is plugged in.
If the parent unit is turned ON, when the adapter is plugged in, the
battery icon in the screen's top right corner will show that the battery
corner lights up to indicate adapter is plugged in.
is charging by cycling the internal segments. The segments stop
cycling when the battery is fully charge. The Blue LED at top left
2.
