manualshive.com logo in svg

Motorola M80NCA6TZ5AN, Руководство по установке, Страница: 35 / 92

Поделиться
Скачать
Motorola M80NCA6TZ5AN Скачать руководство пользователя страница 35

INSTALLATION

MTM800

 

Enhanced Mobile Terminal Installation Manual

35

Dashboard Installation

Installing the Radio in an Automotive Dashboard

1.

Open out the radio cut-out in the dashboard.

2.

Remove the top plastic cover off the radio.

3.

Insert the mounting frame into the cut-out and retain it by bending back the relevant fixing 

tabs, using all 6 where possible, to hold it in place. 

Mounting the Radio in the Frame

1.

Provide the electrical connections to the radio for power, antenna and accessories.

2.

Plug in all the connectors and push the radio with its Remote Head Enhanced, or alternatively 

the Data Expansion Head Enhanced, firmly onto the mounting frame until the two springs 
snap into place.

The tabs are easily bent back by twisting a large flat-
bladed screwdriver into the slot behind the tabs.

For a more secure installation the top and rear of the 
frame should also be secured with screws.

The demount tool can be used as an aid to mounting as 
well as demounting

.

The fixing tabs should be checked for tightness each time 
the radio is removed. The tabs are easily tightened by 
twisting a large flat-bladed screwdriver in the slot behind 
the tabs.The frame is not designed for daily mounting and 
demounting

.

Содержание M80NCA6TZ5AN





























































































Отзывы:

Нет отзывов