Motorola M800, Руководство пользователя

Страница: 109 / 121

Data and Fax Calls - 107
Sending a Data or Fax Call
Use this procedure to send data or a fax from a connected device.
Connect your phone to the device, as described in the last pages, and afterwards
do the following:
Do this To
1
Check the phone
Make sure that the phone is connected
and powered on
2
Open the application on your
computer
Place the call through the application
(such as dial-up-networking or fax).
Note : You cannot dial data or fax
numbers through your phone’s keypad.
You must dial them through your
computer.
3
End the call from the
connected device
Close the call and connection when the
transfer is complete
Receiving a Data or Fax Call
Use this procedure to transfer data or a fax to your portable computer. Connect
your phone to the device as described on page 108.
Find the Feature
> Settings
> Connection
> Incoming Call
Do this To
1
Press CHANGE ( )
Select Next Call
2
Press Scroll to Data In Only or Fax In Only
3
Press SELECT ( )
Set the call format
4
Connect your phone to the
device
Enable the data or fax transfer