Motorola LXN 500, Руководство по установке, настройке и эксплуатации

Страница: 22 / 66

MN003563A01-B
Operation and Configuration
22
Send Feedback
Account Management
LXN 500 O&M Configuration is managed by an administrator.
The administrator assigns access password to a set of management permissions to each user role.
User Roles and Management Permissions
The LXN 500 supports the following user roles:
•
Administrator: user who can administrate, configure, set subscribers and modify the system on an
agency level.
•
Technician: user who can view diagnose and set technical aspects of the system on an agency
level.
•
Operator (default): user who operate the LXN 500 on an agency level and can monitor system
data.
Table 2-1 describes the management permissions assigned to each user role in the LXN 500.
Table 2-1
Management Permissions Assigned to Each User Role in the LXN 500
Action
Management Permissions
Administrator Technician Operator
USIM (Add, Change Status, Import, Delete, Delete all) (See Adding a
Single Subscriber (UEs) on page 24 )
Yes Yes No
View Logs/Statistics of Subscriber (UE) Activity (See UE Activity on
page 28 )
Yes Yes Yes
Set the eNodeB Configuration (See Setting the eNodeB on page 30 ) Yes Yes No
View Logs/Statistics of EPC (See Statistics on page 29 ) Yes Yes Yes
View PLMN in System Configuration (See PLMN Settings on page 31 ) Yes Yes No
Change Configuration of PLMN (See PLMN Settings on page 31 ) Yes Yes No
View System Configuration (See Setting the System on page 31 ) Yes Yes Yes
View Communication Diagnostics (See PLMN Settings on page 31 ) Yes Yes No
Perform Communication Ports Diagnostics (See Communication
Diagnostics on page 33 )
Yes Yes No
View System Health Diagnostics (See PLMN Settings on page 31 and
Performing Diagnostics on page 33 )
Yes Yes Yes
Backup/Restore LXN 500 servers Yes No No
View Battery Diagnostics Info (See Battery Diagnostics on page 38 ) Yes Yes Yes
Perform LED Test (See LEDs Test on page 41 ) Yes Yes No
View Logs/Statistics of System Diagnostics (See System Logging on
page 41 )
Yes Yes Yes
Restart the LXN 500 (See Resetting the LXN 500 on page 62 ) Yes Yes No
Restart the eNodeB (See Resetting the eNodeB on page 63 ) Yes Yes No