Motorola LXN 500, Руководство по установке, настройке и эксплуатации

Страница: 15 / 66

15
MN003563A01-B
Overview
Send Feedback
LXN 500 Back Panel Features
Figure 1-3 shows and Table describes the features of the back panel of the LXN 500.
Figure 1-3
LXN 500 Back Panel Features
1
2
4
5
6
7
PWR
LTE1 LTE2
WIFI
GPS
NET
3
MNG
Protective Covers
Close covers when not in use.
Table 1-2
Back Panel Features
Connector Description
1 NET Network (NET) 1 GBit/s LAN port.
This port is used for connecting the LXN 500 to a Local Area Network (LAN) infrastructure
or an external application server. When maintenance is required, this port enables access
to the servers and eNodeB of the LXN 500.
2 MNG Management (MNG) 1 GBit/s LAN port.
This port is used for connecting an external laptop for configuration, management and
maintenance tasks.
3 LTE2 LTE antenna connector.
4 LTE1 LTE antenna connector.
5 PWR IN 9 to 33 VDC input power from car battery (Future option of the LXN 500).
IMPORTANT
Do not remove the power cable before shutting down the LXN 500.
Verify that the all LEDs on the front panel are off.
2 GPS GPS antenna connector.
3 WiFi Wireless LAN antenna connector.