Motorola LEX L10ig, Руководство пользователя

Страница: 159 / 194

See the documentation provided with the infrastructure (access points (APs), access ports, switches,
Radius servers) for instructions on how to set up the infrastructure.
Once the infrastructure is set up to enforce the chosen WLAN security scheme, use the Wireless &
networks settings to configure the LEX device to match the security scheme.
The device supports the following WLAN security options:
• Open
• Wireless Equivalent Privacy (WEP)
• Wi-Fi Protected Access (WPA)/WPA2 Personal (PSK)
• Extensible Authentication Protocol (EAP)
- Protected Extensible Authentication Protocol (PEAP) — with Microsoft Challenge-Handshake
Authentication Protocol version 2 (MSCHAPv2) and Generic Token Card (GTC) authentication.
- EAP-Transport Layer Security (TLS)
- EAP-TTLS - with Password Authentication Protocol (PAP), MSCHAP and MSCHAPv2
authentication
The Status bar displays icons that indicate Wi-Fi network availability and Wi-Fi status.
NOTICE: Turn off Wi-Fi when not using it, to extend the life of the battery.
Return to Process
Wireless on page 151
Related Links
Connecting to Wi-Fi Networks on page 159
Adding Wi-Fi Networks on page 161
Advanced Wi-Fi Settings on page 162
WLAN Configuration on page 163
Modifying Wi-Fi Networks on page 163
Removing Wi-Fi Networks on page 164
11.2.1
Connecting to Wi-Fi Networks
Connecting to a Wi-Fi network allows you to establish a wireless Internet connection on your device.
NOTICE: Your device remembers Wi-Fi networks to which it connects, and resumes the
connection automatically when in range.
Procedure:
1 From the Home screen, tap → → Wi-Fi .
2 Adjust the Wi-Fi slidebar.
The device searches for WLANs in the area and lists them.
3 Scroll through the list and select the desired WLAN network.
4 Connect to the network by performing one of the following:
MN003477A01-A
Chapter 11: Wireless
Send Feedback 159