24
English
Emergency Mode
You can send and receive
Emergency Group
Calls
in
Trunked
Mode
(TMO)
or in
Direct Mode
(DMO). If your terminal is
configured to operate through a gateway, Emergency calls can be
placed through the gateway.
You can initiate an Emergency Group Call to and receive it from the
selected talkgroup (TMO and DMO).
Your Service Provider will configure the Emergency Alarm and Hot
Microphone features.
Emergency calls will be allocated emergency priority in the system.
Entering or Exiting Emergency Mode (TMO & DMO)
To enter Emergency mode from any mode, press
and hold
the
emergency button at the top of the MTP700.
To exit Emergency mode, press and hold
Exit
. You will switch to
normal Group mode.
Sending an Emergency Alarm (TMO Only)
Your MTP700 will automatically send an Emergency Alarm when in
Emergency mode. This is sent:
•
automatically, upon entering Emergency mode
•
if you press the Emergency key again while the MTP700 is in
Emergency mode.
After sending the alarm, the screen will show one of the following
delivery reports:
•
Alarm Sent
•
Alarm Failed
In both cases the screen returns within a few seconds to the main
screen of the Emergency mode.
The required time you need to press the Emergency button is set to default
to 2 seconds. The time can be configured by your Service Provider.
For call alerts, see settings in the Vibrate menu option and the Tones menu
option.
6866539D36_A.book Page 24 Friday, October 27, 2006 12:20 PM
