Motorola HOTZONE DUO 1.0, Руководство пользователя

Страница: 21 / 28

MOTOMESH 1.2 Mesh Wireless Router Users Guide
Error! Reference source not found. Error! Reference source not found.
2-5
•
The installation location must provide power to the MWR.
•
It is the responsibility of the Network Operator to ensure that the installation complies
with any local building codes and permits.
Assembling the MWR Device
Use the following procedure to assemble a MWR Device.
Procedure 2-1 Assembling the MWR Device
Initial MWR Device Configuration Information
Prior to attempting configuration of a MWR device, the device must be powered up and have
connectivity to the MiSC.
The Geo-location coordinates are entered into an infrastructure device via the Device Manager
Network management tool installed on the MeshManager server (refer to the MeshManager Users
Guide ). Motorola recommends that a DGPS receiver be used to obtain accurate GPS coordinates.
1
Place the brackets at the desired position on the pole.
2 Adjust the position of the box so that the antenna connecters are positioned vertically. Align the antennas
with the N-type connectors on the box and rotate to close.
3
Insert the cable into the external Ethernet port and tighten the connector to ensure a weatherproof seal.
4 Insert the Power Plug into the 4-pin connector.