Quick Reference Guide
25
US and Canada
Head Worn Devices
This device was tested for typical body-worn operation. Use only Motorola tested and
approved accessories to ensure FCC / IC Compliance. The use of third-party accessories
may not comply with FCC / IC RF exposure compliance requirements, and should be
avoided.
To satisfy US and Canadian RF exposure requirements, a transmitting device must operate
with a minimum separation distance of 33.5 mm or more from a person's body.
Pour satisfaire aux exigences Américaines et Canadiennes d'exposition aux
radiofréquences, un dispositif de transmission doit fonctionner avec une distance de
séparation minimale de 33.5 mm ou plus de corps d'une personne.
LED Devices
Compliance statement for LED safety:
COMPLIES WITH IEC 60825-1:2001 (Ed.1.2) & IEC 62471:2006 (Ed.1.0); EN 62471:2008.
Power Supply
Use ONLY a Motorola approved UL LISTED ITE (IEC/EN 60950-1) power supply with
electrical ratings: Output 5.4 VDC, min 3 A, with a maximum ambient temperature of at
least 45 °C. Use of alternative power supply will invalidate any approvals given to this unit
and may be dangerous.
Battery Information
Use only Motorola approved batteries. Accessories which have battery charging capability
are approved for use with the following battery models:
Motorola BTRY-MC7XEAB0E (3.7 VDC, 1950 mAh)
Motorola BTRY-MC7XEAB0H (3.7 V DC, 4800 mAh)
Motorola/Symbol rechargeable battery packs are designed and constructed to the highest
standards within the industry.
However, there are limitations to how long a battery can operate or be stored before
needing replacement. Many factors affect the actual life cycle of a battery pack, such as
heat, cold, harsh environmental conditions and severe drops.
When batteries are stored over six (6) months, some irreversible deterioration in overall
battery quality may occur. Store batteries at half of full charge in a dry, cool place, removed
from the equipment to prevent loss of capacity, rusting of metallic parts and electrolyte
leakage. When storing batteries for one year or longer, the charge level should be verified
at least once a year and charged to half of full charge.
Replace the battery when a significant loss of run time is detected.
Standard warranty period for all Symbol batteries is one year, regardless if the battery was
purchased separately or included as part of the mobile computer or bar code scanner. For
more information on Symbol batteries, please visit:
http:/mysymbolcare.symbol.com/battery/batbasics1.html
Review
ratings: Output 5.4 VDC, min 3 A, with a
ratings: Output 5.4 VDC
°C. Use of alternative power supply will in
°C. Use of alternative power supply will in
be dangerous.
be dangerous.
I f
ti
I f
ti
Copy
ximum ambient temperature o
imum a
date any approvals given to t
date any approvals given to t
