6
Getting started
1.2
Installing and charging the handset battery
pack
1.
Slide off the battery compartment cover to remove it. Place the
supplied rechargeable battery pack in the battery compartment, with
the battery connector plugged in, as shown.
2.
Slide the battery compartment cover back on.
3.
Put the handset on the base to charge for at least 24 hours. Once
charged, the (battery icon) will indicate that the handset is fully
charged.
IMPORTANT
Use only the rechargeable battery pack provided with the product.
Note the alert tone to ensure the handset is charging in the base or the
charger successfully.
Wall mounting on base
This phone can be mounted on any standard wall plate.
1.
Plug the power adapter with smaller pin plug & telephone line cord
into the base.
2.
Plug the other end of the power adapter & telephone line cord into the
power outlet.
3.
Align the mounting slots on the base with the mounting posts on the
wall. Then push in and down until the phone is firmly seated.
