Motorola F3030A, Руководство разработчика

Страница: 22 / 72

Developer Board and Interfaces Description
16 98-08901C67-O
3.4.1.4 Power Source Selection
The Developer Board AC adapter and battery power inputs include a selection jumper (P202) that diverts either the regulated
AC adapter power or the battery power to the board.
Jumpers are provided for disconnecting the power from the Developer Board and for disconnecting the power from the g20.
You may wish to remove the Developer Board power jumper and shut off the power to the board in order to diagnose a problem
that may be caused by the board. The g20 will continue to receive power.
You may also want to remove the g20 power jumper and then connect an amperometer to the jumper’s two pins to measure the
current through the g20.
Table 6. Power Source Jumper (P202)
P202 Jumper
Position
Selected Mode Power Source
1 2 3
• •
Adapter AC Adapter
• •
Battery LiIon Battery
Adapter and battery disconnected DC power only
Table 7. Developer Board Power Jumper (P201)
P201
Jumper
Position
Selected Mode
1 2
• •
Developer Board connected to
power source
Developer Board disconnected
from power source
Table 8. g20 Power Jumper (P201)
P200
Jumper
Position
Selected Mode
1 2
• •
g20 connected to power
source
g20 disconnected from power
source